Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

Importing maps and batch configuration packages to devices

Import a map and batch configuration package to devices via USB.
Important: Make sure that you have:
  1. In VIVE Business+ console, go to Connection.
  2. Connect your headset to your computer with a USB cable, and then click Connect. Your headset will appear on the Connection screen.
    Note:
    • Make sure USB debugging is enabled on your headset. Go to Settings > Advanced > Developer options > USB debugging in your headset to check.

    • Wake your headset if it's in standby mode.

    • If you want to simultaneously import the map and batch configuration package to more than one device, connect the other devices to your PC through other available USB ports or use a USB hub.
  3. In the Connection screen, select the Mode you want to use for the device.
    • Normal When your device is connected to the PC, VIVE Business+ console settings will be applied. When you disconnect the device from the PC, VIVE Business+ setting will be applied. If VIVE Business+ settings are not applied, see What should I do if VIVE Business+ settings are not applied?.
    • Offline Only VIVE Business+ console settings will be applied to the device.
  4. In the left panel, click Import.
  5. In Import from (device type), select the device you're using.
  6. In Map name and Batch configuration, select the map and batch configuration package you want to import to your device.
  7. In Import to selected devices, select the devices you want to import to.
  8. Click Import.
Warning: If Mode is set to Normal, the device will sync with VIVE Business+ if the device connects to a Wi‍-Fi network and is disconnected from the PC. If the device is part of a group, the map and batch configuration package you've imported will be overwritten with the group settings set on VIVE Business+.
Submit
Thank you! Your feedback helps others to see the most helpful information.