-
Introduction
-
Tracking modes
-
Marker-based tracking features
-
Tools and applications
-
Headset setup
-
Marker-Based Location Sharing setup
- Setting up Marker-Based Location Sharing
- Creating ArUco markers for Marker-Based Location Sharing
- Aligning the height of a virtual scene using an ArUco marker
- Moving a user to a specific point in a virtual scene
- Running Marker-Based Location Sharing with VIVE Business Streaming
- Marker-Based Location Sharing APIs (AIO)
- Marker-Based Location Sharing APIs (PC VR)
- Marker-Based Location Sharing JSON files
-
LBE Mode/LBE Hybrid Mode setup
-
LBE map configuration
-
Marker-Based Drift Prevention and Marker-Based Relocation setup
-
Marker-Based Scene Alignment setup
-
Simulator VR Mode setup
- Setting up Simulator VR Mode
- Pairing VR controllers with a headset
- Pairing wrist trackers with a headset
- Installing an anchor controller or tracker in a VR simulator
- Coordinate alignment
- Anchor controller and tracker origin points
- Aligning VR and anchor coordinate systems using a VR controller
- Aligning VR and anchor coordinate systems using an ArUco marker
- Simulator VR Mode FAQs
-
Other services
-
Additional features
- Contact Us
Pairing VR controllers with a headset
You can pair two VR controllers with a headset when using
Simulator VR Mode.
The left controller will be used as the anchor controller in your VR simulator.
- Power on the headset and connect it to your PC.
- In VBC, go to Device Settings and click Pair controllers.
-
Press and hold the menu and
Y buttons on the left controller, and the VIVE and
B buttons on the right controller for about 2 seconds to initiate pairing mode. The controller LEDs will flash blue.
When the controllers have been paired successfully, the LEDs will turn solid green.
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.