Adding VR headsets to groups

Add the VR headsets to each of the groups that you will manage in VIVE Host. Here's how.

Tap the current organization and group in the upper left to open a dropdown menu, then select the organization and group where you want to add devices.
Tap the Device management tab and then tap Add device.
In the Add a device dialog box, enter the following information:
- Name: Device name for the VR headset that you're adding to the group.
- Wi-Fi settings: Settings—SSID (network name), security type, and other required settings—for connecting the headset to the same wireless network your Android device is connected to.
Tip:
- The maximum length for the device name is 13 characters.
- You don't need to fill in the Wi‍-Fi settings if the headset is already configured with these settings.
Tap Generate QR code.
Put on the VR headset and turn it on, then do one of the following:
- (After a factory reset or after turning on the headset for the first time) Press the headset button three times to enable the QR code scanner.
- Open Settings, go to Advanced, and select MDM setup > QR code.
Scan the QR code shown on the VIVE Host screen with the headset.
Note: The QR code contains the device name, Wi‍-Fi settings, and the organization and group information. This information will be used to enroll the headset.
After the headset is enrolled and added successfully in VIVE Host, tap OK.
Repeat the above steps to add more VR headsets to the group.

Was this helpful? Yes No

Submit

Thank you! Your feedback helps others to see the most helpful information.