Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

Putting on the headset

Note: Before putting on the headsets, make sure that you've taken off the protective cover from the lenses and the protective film that covers the tracking sensors.
  1. Do the following:
    • Loosen the velcro straps on top.
    • Loosen the back head support using the Adjustment dial.
    Note:
    • Always use the Adjustment dial to loosen the back head support. Do not pull it.
    • If you have long hair or a ponytail, loosen the back head support all the way.
  2. With the headset on, pull down the back head support and position it at the base of your skull.
    Note: If you have long hair, position the back head support above the base of your skull.
  3. Tighten the velcro straps and Adjustment dial until you find your preferred fit. Do not push to tighten the back head support. The fit should be snug.
    Note: Always use the Adjustment dial to tighten the back head support. Do not push it in.
Submit
Thank you! Your feedback helps others to see the most helpful information.