-
Introduction
-
Tracking modes
-
ArUco markers and marker-based tracking features
-
ArUco markers
-
Marker-based tracking features
-
-
Marker-Based Location Sharing setup
- Setting up Marker-Based Location Sharing
- Creating ArUco markers for Marker-Based Location Sharing
- Aligning the height of a virtual scene using an ArUco marker
- Moving a user to a specific point in a virtual scene
- Setting up Marker-Based Location Sharing with VIVE Business Streaming
- Marker-Based Location Sharing APIs (AIO)
- Marker-Based Location Sharing APIs (PC VR)
-
LBE Mode/LBE Hybrid Mode setup
-
LBE map configuration
-
Marker-Based Drift Prevention setup
-
Marker-Based Advanced Relocation setup
-
Marker-Based Scene Alignment setup
- Setting up Marker-Based Scene Alignment
- Configuring the position of an ArUco marker in a virtual scene (Unity)
- Creating ArUco markers for Marker-Based Scene Alignment
- Setting up Marker-Based Scene Alignment with VIVE Business Streaming
- Marker-Based Scene Alignment APIs (AIO)
- Marker-Based Scene Alignment APIs (PC VR)
-
Simulator VR Mode setup
- Setting up Simulator VR Mode
- Pairing wrist trackers with a headset
- Installing an anchor controller or tracker in a VR simulator
- Coordinate alignment
- Anchor controller and tracker origin points
- Aligning VR and anchor coordinate systems using a VR controller
- Aligning VR and anchor coordinate systems using an ArUco marker
- Simulator VR Mode FAQs
-
Other services
-
Additional features
- Contact Us
Creating ArUco markers for Marker-Based Advanced Relocation
ArUco markers created for
Marker-Based Advanced Relocation allow headsets to resume tracking after they power on or wake from standby.
Note:
To avoid potential issues when generating JSON files with the VIVE ArUco Marker Generator, make sure your computer's display language is set to English.
- Open the VIVE ArUco Marker Generator on your PC.
- For Marker ID, enter a value between 0 and 99.
-
For the marker size, specify the length of each side in centimeters. Use two decimal places for greater accuracy. You can enter a value between 25.00 and 100.00.
Note:
Larger markers can be detected from farther away. For example, a marker that's 25 cm long on each side can fit on a standard B3-size sheet of paper (35 x 50 cm) and can be detected from between 0.7 and 1.7 meters away.
- Specify the DPI for the marker. DPI is set to 72 by default.
- For Function, select Marker-Based Advanced Relocation.
- Click Save. The marker settings will appear on the list.
- Click Generate. The marker settings will be downloaded as a JSON file.
- Copy the JSON file to the mobile device you'll use to create the LBE map.
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.