Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

Using the mounting kit

For best results, install SteamVR Base Station 2.0 using a mounting kit, which is provided as an in-box item in VIVE Pro full kit. If you bought more SteamVR Base Station 2.0 units, you can separately purchase a similar mounting kit from a third-party supplier.
Note:
  • You will need a screwdriver or drill to install the mounts. Ask a professional for help when using power tools.
  • Remember to peel off the protective film from the front panel after you've mounted the base stations.
  1. Mark where you want to install each of the mounts on your wall, and then screw the mounts in.

    When mounting on concrete or drywall, first drill ¼ inch holes and insert anchors before screwing mounts in.

  2. Rotate the base station to screw it onto the threaded ball joint. Do not screw the base station all the way in, only enough to be stable and oriented correctly.
  3. Tighten the wingnut to the base station to secure it in place.
  4. To adjust the angle of the base station, loosen the clamping ring while carefully holding the base station to prevent it from falling.
  5. Tilt the base station toward the play area. To fix the angle of the base station, tighten the clamping ring back in.
  6. Attach the power cable to each base station.
Submit
Thank you! Your feedback helps others to see the most helpful information.