Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

Setting up VIVE Flow using the VR controller

You can use the VR controller to set up VIVE Flow.
Note: If you don't have the VR controller, check the VIVE accessories website in your region and see if the VR controller is available.

Make sure you've inserted the batteries into the VR controller before setting up VIVE Flow.

  1. Connect VIVE Flow to a power source. See Connecting to a power source.
  2. Put on VIVE Flow, and then press and hold the Headset button until the progress bar is full. See About VIVE Flow to see the location of the Headset button.
  3. Move your head and point the beam toward the language you want to use.
  4. Go through the hardware tutorial. When you reach the Select setup method step, select General setup.
  5. Follow the instructions on VIVE Flow. Make sure you can easily reach for the VR controller as you need to use it while setting up VIVE Flow.
Submit
Thank you! Your feedback helps others to see the most helpful information.