Using Auto boundary to set up your play area

You can use the Auto boundary feature to scan your space with the headset and automatically create the safety boundary for your play area. Here's how:

From the Lobby, select Settings.
Select Advanced > Beta features.
Turn on Auto boundary.
Select Boundary > Safety boundary.
Look down and scan the floor in your play area.
Tip: To manually set the safety boundary for your play area, select Manual setup and choose whether to use Room-scale or Stationary mode.
After you've finished scanning, select Confirm. The system will automatically draw the safety boundary of your play area.
Check and make sure the suggested boundary is free from obstacles such as furniture and away from stairs or other potential safety hazards.
Tip: If you need to make adjustments, press and hold the trigger, then mark areas outside the boundary to add them or areas inside the boundary to remove them.
When done, select Confirm.

Was this helpful? Yes No

Submit

Thank you! Your feedback helps others to see the most helpful information.