Generating a QR code to enroll devices

Create a QR code to quickly enroll devices.

Important: You need to enroll your headsets in order for you to manage them using the VIVE Advanced Device Management System. To learn how to enroll your headsets, see Enrolling devices.

In VIVE Advanced Device Management System, do any of the following:
- Click Dashboard. Under Enroll devices, click Go.
- Click Manage devices > Registered > Enroll.
Select Device information, and then enter the following information:
- Device name Give a name for the device(s) you’re enrolling.
- Initial device name suffix Enter the number to add as a suffix to the device name for the first device you enroll.
- Auto increase suffix Automatically increase by 1 the number after the Device name based on Initial device name suffix. This prevents duplication of device names.
  For example, if Initial device name suffix is 3, the device name of the first device you enroll will be device_name3. The succeeding devices you enroll will be named device_name4, device_name5, device_name6, and so on until you stop enrolling devices.
Select Wi-Fi settings, and then enter the necessary Wi-Fi network information so devices can connect to the Wi-Fi network. Devices need to be connected to Wi-Fi to get updates and download apps and files.
Note: Make sure the Wi-Fi access point and headset are in close proximity of each other.
Click Generate QR code.

Was this helpful? Yes No

Submit

Thank you! Your feedback helps others to see the most helpful information.