-
Overview
-
Getting started
-
Assembly
-
Setup (headset and controllers)
-
Setup (play area)
-
Basics
-
Mixed reality
-
Additional accessories
-
-
Managing screenshots, files, and apps
- Connecting the headset to your computer
- Transferring screenshots and screen recordings to your computer
- Browsing and viewing files
- Viewing 360° photos
- Connecting an external storage device to the headset
- Transferring files between the headset and an external storage device
- Installing apps on the headset
- Installing APK files on the headset
- Uninstalling apps
- Changing app permissions
-
Using VIVE Manager
-
Sharing and streaming content
-
Settings
- Connecting to a Wi-Fi network
- Setting a device passcode
- Installing system and firmware updates
- Resetting your headset (factory reset)
- Adjusting the power frequency
- Choosing a display mode
- Setting a timeout for sleep mode
- Adjusting audio settings
- Choosing a tracking mode
- Pairing Bluetooth devices
- Setting up and using Kiosk mode
- Adding a VPN connection
-
VIVE XR Elite for Business
-
Solutions and FAQs
-
General
-
Hardware
- What should I do when the headset is unable to detect the controllers?
- How do I check the battery level of the headset and controllers?
- Why isn't the battery percentage displaying correctly?
- Why does my headset turn off when it's connected to a power bank?
- Why won't the headset turn on?
- How long is the USB-C to USB-C cable that comes with the headset?
- Can I connect a wired USB-C audio device to the headset?
-
Apps and content
-
- Contact Us
Headset, battery cradle, and controller LEDs
The headset, battery cradle, and controllers have LEDs that indicate various statuses.
Headset LED
The LED on the front side of the headset indicates the current status.
| LED | Status |
|---|---|
| White | The headset is on and the attached battery cradle or connected power source is fully charged. |
| Flashing white |
|
| Breathing white | The headset display is off or in standby mode. |
| Red | The headset has overheated or malfunctioned. |
| Breathing red | Passthrough mode is on, passthrough recording is in progress, or the headset is streaming content. |
| Off | The headset is off. |
Battery cradle LED
The power LED on top of the battery cradle indicates the charging status.
| LED | Status |
|---|---|
| Flashing red | Battery level is below 15% |
| Red | Battery is charging |
| White | Battery is fully charged |
Controller LED
Each controller has an LED that indicates its current status.
| LED | Controller status |
|---|---|
| Flashing red | Battery level is below 15% |
| Orange | Controller is charging |
| Flashing blue | Controller is in pairing mode |
| Blue | Controller is connecting to the headset |
| Flashing blue and orange alternately | Controller is connecting to the headset while it's charging |
| Green | Controller is connected to the headset |
| Flashing blue and red alternately | Controller firmware is being updated |
| Off | Controller is idle |
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.