-
Introduction
-
Tracking modes
-
ArUco markers and marker-based tracking features
-
ArUco markers
-
Marker-based tracking features
-
-
Marker-Based Location Sharing setup
- Setting up Marker-Based Location Sharing
- Creating ArUco markers for Marker-Based Location Sharing
- Aligning the height of a virtual scene using an ArUco marker
- Moving a user to a specific point in a virtual scene
- Setting up Marker-Based Location Sharing with VIVE Business Streaming
- Marker-Based Location Sharing APIs (AIO)
- Marker-Based Location Sharing APIs (PC VR)
-
LBE Mode/LBE Hybrid Mode setup
-
LBE map configuration
-
Marker-Based Drift Prevention setup
-
Marker-Based Advanced Relocation setup
-
Marker-Based Scene Alignment setup
- Setting up Marker-Based Scene Alignment
- Configuring the position of an ArUco marker in a virtual scene (Unity)
- Creating ArUco markers for Marker-Based Scene Alignment
- Setting up Marker-Based Scene Alignment with VIVE Business Streaming
- Marker-Based Scene Alignment APIs (AIO)
- Marker-Based Scene Alignment APIs (PC VR)
-
Simulator VR Mode setup
- Setting up Simulator VR Mode
- Pairing wrist trackers with a headset
- Installing an anchor controller or tracker in a VR simulator
- Coordinate alignment
- Anchor controller and tracker origin points
- Aligning VR and anchor coordinate systems using a VR controller
- Aligning VR and anchor coordinate systems using an ArUco marker
- Simulator VR Mode FAQs
-
Other services
-
Additional features
Creating ArUco markers for Marker-Based Advanced Relocation
ArUco markers created for
Marker-Based Advanced Relocation allow headsets to resume tracking after they power on or wake from standby.
Note:
To avoid potential issues when generating JSON files with the VIVE ArUco Marker Generator, make sure your computer's display language is set to English.
- Open the VIVE ArUco Marker Generator on your PC.
- For Marker ID, enter a value between 0 and 99.
-
For the marker size, specify the length of each side in centimeters. Use two decimal places for greater accuracy. You can enter a value between 25.00 and 100.00.
Note:
Larger markers can be detected from farther away. For example, a marker that's 25 cm long on each side can fit on a standard B3-size sheet of paper (35 x 50 cm) and can be detected from between 0.7 and 1.7 meters away.
- Specify the DPI for the marker. DPI is set to 72 by default.
- For Function, select Marker-Based Advanced Relocation.
- Click Save. The marker settings will appear on the list.
- Click Generate. The marker settings will be downloaded as a JSON file.
- Copy the JSON file to the mobile device you'll use to create the LBE map.
此内容对您有帮助吗?
是
否
提交
谢谢!您的反馈可以帮助其他人了解最有用的信息。