Nothing's in my cart
-
Overview
-
Getting started
-
Hardware
-
Setup (headset and controllers)
-
Setup (play area)
-
Basics
-
Mixed reality
-
Additional accessories
-
-
Managing screenshots, files, and apps
- Connecting the headset to your computer
- Transferring screenshots and screen recordings to your computer
- Browsing and viewing files
- Viewing 360° photos
- Connecting an external storage device to the headset
- Copying files between the headset and external storage
- Installing apps on the headset
- Installing APK files on the headset
- Uninstalling apps
- Changing app permissions
-
Using VIVE Manager
-
Sharing and streaming content
-
Settings
- Setting a device passcode
- Connecting to a Wi-Fi network
- Adding a VPN
- Adjusting the power frequency
- Adjusting audio settings
- Choosing a display mode
- Choosing a tracking mode
- Pairing Bluetooth devices
- Setting up and using Kiosk mode
- Installing system and firmware updates
- Resetting the headset (factory reset)
-
VIVE Focus Vision for Business
-
Solutions and FAQs
-
General
-
Headset and controllers
-
Play area
-
Eye tracking and IPD
-
System
-
- Contact Us
Setting up your play area
The play area is a space in your environment that you designate for VR use. A safety boundary appears when you're close to the edges of your play area.
When you set up a Room-scale play area, you'll need a space measuring 1.5 × 1.5 m that's free from obstacles such as objects, pets, and people. If you don't have that much space, you can also set up a Stationary play area so you can interact in VR while sitting or standing.
During setup, you'll be guided with instructions on how to use hand gestures or controllers to set up your play area.
- Set your floor position. Use your hand or controller to push down the virtual floor to match it with your physical floor.
- Choose to set up a Room-scale or Stationary play area.
-
If you choose
Room-scale, draw the boundary of your play area.
- Pinch and hold on a starting point with your fingers, or press and hold the trigger on a starting point.
- Trace along the floor to draw the boundary. For your safety, make sure to exclude any obstacles in your environment.
- Set your front-facing view in VR. This is where menus, dialog boxes, and messages will appear.
Tip:
- If you move your headset to another location and put it back on, the headset will prompt you to set up your play area again.
- You can go to Settings and select Boundary to reconfigure your front-facing view, floor position, safety boundary, and other boundary settings.
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.