Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

Can I cast VIVE Focus Vision to a computer?

Yes. You can cast VIVE Focus Vision to a Windows computer that supports Miracast.

Checking Miracast support

Here's how to check if your computer supports Miracast:
  1. Open the command prompt window.

    a) Press the Windows logo and R keys to open the Run dialog box.

    b) Enter cmd, and then click OK.

  2. In the command prompt window, enter the following command:

    netsh wlan show drivers

  3. In the driver details, check if Wireless Display Supported displays Yes, which means your computer supports Miracast.

Setting up casting on your computer

Here's how to enable casting on your Windows computer:
  1. Open the command prompt window as an administrator.

    a) Press the Windows logo and R keys to open the Run dialog box.

    b) Enter cmd, and then press Ctrl + Shift + Enter.

  2. In the command prompt window, run the following command and wait for the operation to complete:

    DISM /Online /Add-Capability /CapabilityName:App.WirelessDisplay.Connect~~~~0.0.1.0

  3. Click Start > Settings > System > Projecting to this PC.
  4. To allow VIVE Focus Vision to cast to your computer, configure your projection settings as follows:

Casting the headset to your computer

  1. Put on your headset.
  2. Press the VIVE button on the right controller.
  3. Select Cast, and then select your computer from the list.
  4. Take off your headset.
  5. In the Windows Connect app, choose to allow projecting to the computer, and then click OK.
  6. Put on your headset again. What you're viewing in VR will now appear on your computer.
Tip: To stop casting to your computer, press the VIVE button on the right controller, select Cast, and then select Stop.
Submit
Thank you! Your feedback helps others to see the most helpful information.