Nothing's in my cart
-
Overview
-
Getting started
-
Hardware
-
Setup (headset and controllers)
-
Setup (play area)
-
Basics
-
Mixed reality
-
Additional accessories
-
-
Managing screenshots, files, and apps
- Connecting the headset to your computer
- Transferring screenshots and screen recordings to your computer
- Browsing and viewing files
- Viewing 360° photos
- Connecting an external storage device to the headset
- Copying files between the headset and external storage
- Installing apps on the headset
- Installing APK files on the headset
- Uninstalling apps
- Changing app permissions
-
Using VIVE Manager
-
Sharing and streaming content
-
Settings
- Setting a device passcode
- Connecting to a Wi-Fi network
- Adding a VPN
- Adjusting the power frequency
- Adjusting audio settings
- Choosing a display mode
- Choosing a tracking mode
- Pairing Bluetooth devices
- Setting up and using Kiosk mode
- Installing system and firmware updates
- Resetting the headset (factory reset)
-
VIVE Focus Vision for Business
-
Solutions and FAQs
-
General
-
Headset and controllers
-
Play area
-
Eye tracking and IPD
-
System
-
- Contact Us
What should I do if I can't see my controllers in VR?
Once paired with the headset, your controllers will automatically be detected when they're on. If you don't see them in VR, try one of the following:
- The controllers may be in sleep mode. Shaking them gently will wake them up.
- If your controllers are off, turn them on by briefly pressing the VIVE button on the right controller and the Menu button on the left controller. The controller LEDs will turn blue while they are connecting, or green when they are connected.
- If the controllers can't be detected after you installed a firmware update, press and hold the VIVE and Menu buttons to restart both controllers.
- Make sure your controllers are charged. A flashing red LED indicates low power. If the controllers are low or don't respond, try charging them. See VIVE Focus Vision controllers for details.
- If your controllers are on but still not being detected, you might need to pair them again. See Pairing controllers.
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.