Nothing's in my cart
-
1.0 Fall Protection
-
1.1 Lesson Selection (Main Hub)
-
1.2 Lesson One - Gear Selection
-
1.3 Lesson Two - Training Room
-
1.4 Lesson Three - Equipment Retrieval
-
-
2.0 Confined Space
-
2.1 Lesson Selection (Main Hub)
-
2.2 Lesson One - Gear Selection
-
2.3 Lesson Two - Training Room
-
2.4 Lesson Three - Gas Leak
-
-
3.0 Lockout Tagout (LoTo)
-
3.1 Lesson Selection (Main Hub)
-
3.2 Lesson One - Gear Selection
-
3.3 Lesson Two - Training Room
- About Training Room
- Setup 1: Select all equipment needing LoTo - Part 1
- Setup 2: Select all equipment that needs LoTo - Part 2
- Setup 3: Select all equipment that needs LoTo - Part 3
- Setup 4: Radio to notify affected workers
- Setup 5: Apply and remove LoTo - Circuit Breaker Switch and Valve
- Setup 6: Release residual energy and verify
- Scoring
-
3.4 Lesson Three - Factory Site
- About Factory Site
- Step 1: Use Radio to Notify Affected Employees
- Step 2: Turn off the Power Switch, and Turn off Circuit Breaker Switch 3, then LoTo
- Step 3: Confirm Electrical Power Source Is Turned off
- Step 4: Release any Residual Energy
- Step 5: Services the Pump with the Wrench
- Step 6: Remove LoTo, and Open Main and Residual Pressure Valve
- Step 7: Remove LoTo and Turn on Circuit Breaker Switch 3
- Step 8: Notify Coworkers that Work Is Done
- Step 9: Power on the Pump
- Scoring
-
- Contact Us
Lesson Selection (Main Hub)
The trainee starts in the Main Hub with a Lesson Select console screen in front of them with the following text:
Please press one of the numbered buttons to select a lesson.
There are three blue buttons under the screen (numbered 1 - 3), with
START and
STOP buttons under them. Pressing the buttons will take the trainee into the following lessons:
- Button 1 - Gear Selection
- Button 2 - Training Room
- Button 3 - Gas Leak
A door to the Training Room will appear to the left. A locker with shelves will appear to the right, with the following text above it.
Reach for the object and press TRIGGER with your index finger to GRAB it.
The locker shelves have a variety of confined space gear:
- 2 dust masks
- 1 pair of goggles
- 2 hardhats
- 2 different types of gas meters
- 2 radios
- 2 pairs of gloves
- 1 air blower
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.