-
1.0 Fall Protection
-
1.1 Lesson Selection (Main Hub)
-
1.2 Lesson One - Gear Selection
-
1.3 Lesson Two - Training Room
-
1.4 Lesson Three - Equipment Retrieval
-
-
2.0 Confined Space
-
2.1 Lesson Selection (Main Hub)
-
2.2 Lesson One - Gear Selection
-
2.3 Lesson Two - Training Room
-
2.4 Lesson Three - Gas Leak
-
-
3.0 Lockout Tagout (LoTo)
-
3.1 Lesson Selection (Main Hub)
-
3.2 Lesson One - Gear Selection
-
3.3 Lesson Two - Training Room
- About Training Room
- Setup 1: Select all equipment needing LoTo - Part 1
- Setup 2: Select all equipment that needs LoTo - Part 2
- Setup 3: Select all equipment that needs LoTo - Part 3
- Setup 4: Radio to notify affected workers
- Setup 5: Apply and remove LoTo - Circuit Breaker Switch and Valve
- Setup 6: Release residual energy and verify
- Scoring
-
3.4 Lesson Three - Factory Site
- About Factory Site
- Step 1: Use Radio to Notify Affected Employees
- Step 2: Turn off the Power Switch, and Turn off Circuit Breaker Switch 3, then LoTo
- Step 3: Confirm Electrical Power Source Is Turned off
- Step 4: Release any Residual Energy
- Step 5: Services the Pump with the Wrench
- Step 6: Remove LoTo, and Open Main and Residual Pressure Valve
- Step 7: Remove LoTo and Turn on Circuit Breaker Switch 3
- Step 8: Notify Coworkers that Work Is Done
- Step 9: Power on the Pump
- Scoring
-
- Contact Us
Lesson Selection (Main Hub)
The trainee appears in the Main Hub with a Lesson Select console screen in front of them.
The following appears on the console:
Press one of the numbered buttons to select a lesson.
There are 3 blue buttons under the screen (numbered 1 - 3), with
START and
STOP buttons under them. Pressing the buttons will take the trainee into the following lessons:
- Button 1 - Gear Selection
- Button 2 - Training Room
- Button 3 - Construction Site
A door to the Training Room appears to the left, and a locker with shelves appears to the right, with the following text above it:
Reach for the object and press TRIGGER with your index finger to GRAB it.
A variety of lockout tagout gear appears on the locker shelves:
- 2 dust masks
- 2 pairs of goggles
- 2 hardhats
- 2 pairs of gloves
- 1 tag
- 1 valve lock
- 1 circuit breaker lock
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.